Halnn provide different CBN tool solutions for Roll industry

Halnn Superhard CBN tools are mainly used for machining parts with high hardness and difficult processing rolls, such as rebar rolls, wire rolls, sheet rolls, etc. According to the material of the roll, hardness and processing conditions, Halnn solid CBN tool is recommended. >>

PCD Notching Tools for machining Tungsten Carbide Rings

2019-12-13

After many times tested and long time research, we found that PCD insert is the best choice of machining tungsten carbide rings. >>

Hard turning hardened steel chooses Halnn CBN inserts

Halnn CBN inserts grade for hard turning hardened steel Characteristic Halnn CBN Cutting depth Cutting condition Toughness (Roughing) Hardness (Finishing) BN-S20 1-10mm Interrupt-Continuous BN-H20 1mm Semi-Interrupt BN-S200 1mm Continuous BN... >>

CBN tools machining bearings for higher surface roughness

Halnn has developed BN-S20 grades, BN-S200 grades and BN-H11 grades of three CBN tools for roughing, semi-finishing and finishing machining bearings, respectively >>

Advantages of Halnn CBN Tools in Milling

Halnn CBN milling tools mainly mill high hardness cast iron, high hardness / strength steel, gray cast iron and other materials >>

Halnn BN-K1 grade CBN tools machining Mill Rolls

2020-08-15

The use of Halnnsolid CBN tool can not only suitable for roughing & finishing mill rolls, the metal removal rate is high, the tool durability is high, reducing the frequency of tool change and improving production efficiency. >>

CBN Insert and Ceramic Insert for machining cast iron

Halnn first proposed cbn inserts for machining high alloy cast iron, white iron, grey iron,and has researched cbn grade BN-S300, BN-K20 and BNK30 for gray cast iron and cbn grade BN-K1, BN-H10 and BN-K10. >>

What is the performance of PCBN Insert hard turning bearings

PCBN Insert is the most suitable cutting tools for turning bearing instead of grinding, especially BN-S20,BN-S200,BN-H11 PCBN Grade are widely used. For different machining condition >>

PCD End Mills and CVD Diamond Coating Tools for Graphite machining

Graphite Material are difficult to machine, Halnn Tools can offer CVD Coating Tools and PCD End Mills to help satisfy the customers, and can be used for high speed machining Graphite electrode and Mold. >>

Halnn superhard CBN tool for highspeed cutting of gray cast iron

Halnn super hard,the development of high-speed cutting gray cast iron boron nitride tool BN-S300 grade and BN-K20 grade. >>

The Effect of CBN insert BN-H11 machining Gray Cast Iron

As a leading brand of professional hard material processing Tools, Halnn Tools provides a variety of green and efficient cutting and grinding Tools and solutions. >>